Cherry Mobile Flare S4 Max Philippines Discussion

[cherryph]

Discussion thread for all Cherry Mobile Flare S4 Max owners, buyers, or just seeking additional information in Philippines, in here we can discuss about the following:

Store Prices
- Retails prices from stores
- Upcoming promotion sales
- Phone giveaways

Firmware and OS Updates
- What are the current available firmware updates, patches and updates

Hardware Problems
- Defective or broken parts
- Parts replacement

Support Experience
- How to get in touch with support
- Support experience may it be positive or negative

Others
- Why you like the phone any pro's and cons
- personal reviews and opinions

Cherry Mobile Flare S4 Max Specs and Info:

• 5.5-Inch HD IPS Display (720 x 1280 Pixels, 267 ppi)
• Android 6.0 Marshmallow OS
• 1.3GHz Quad Core Processor
• 1GB of RAM
• 13.0 Megapixel Autofocus Main Camera with LED Flash
• 5.0 Megapixel Front Camera
• 8GB Internal Storage
• Expandable via MicroSD
• Dual SIM (Micro)
• 3G HSPA+, 2G EDGE and GPRS Networks
• Wi-Fi 802.11 b/g/n
• Blutooth 4.0
• A-GPS
• FM Radio
• MicroUSB 2.0
• 3.5mm Audio Jack
• Accelerometer
• Proximity Sensor
• Ambient Light Sensor
• 4200mAh Li-ion Battery (Removable)
• ₱3,499.00 Official Price

Stock ROM
(to be updated)

Custom ROM
XOS_ROM_By_EricKim

Custom Recovery
Cherry Mobile Flare S4 Max TWRP Recovery

You can post anything related with Cherry Mobile Flare S4 Max for other devices kindly go to https://pinoytech.ph/categories/smart-phones-and-tablets.5/

 

[cherryph]

Install ROM Guide with SP MDT:

1. Turn off the smartphone. Cable is not connected to the computer.
2. Remove the battery and insert it again (if the battery is removable)
3. Connect your phone to a computer cable. The operating system detects a new device
4. Disconnect the cable from the computer.
5. Run SPMultiPortFlashDownloadProject.exe
6. Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7. Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8. Click "Start all".
9. Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer, remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10. After (OK) click Stop and disable any phone