How to Install CWM via SPFT and ROOT your IPXL/OMEGA5.5 via CWM

bytegeeks

Geek
Pinoy Techie
First, I believe you are already familiar with the SPFT and on how to operate it. Also, you must have your ADB drivers installed already. I'll try to make this guide as simple as possible.

1. Enable debugging mode, How: go to settings then tap "About Phone" then tap your BUILD NUMBER 5-7 times to enable the "Developer Options." Tap the slider to enable the menu, look for the USB Debugging and enable it.
2. Install the drivers
3. Download SPFT
4. Download CWM
5. Download the latest SuperSU, Link (http://download.chainfire.eu/396/SuperSU/)
6. Download Scatter File

Now i believe you're already properly prepped (you, your pc and your IPXL) and you have all the files downloaded.

7. Open SPFT and load the scatter file, uncheck everything, make sure you only have your recovery checked, upload the CWM and then click download.

8. Turn off your phone, remove the battery then plug your phone to your pc, place your battery and wait for it to finish downloading the new recovery to your phone. If done successfully you will see a green circle with "OK" indicated on it.

Now you have your Custom Recovery installed

9. Now, place your SuperSu zip file to your phone then access your CWMR then select install zip from sdcard. Select the SuperSU. Now you have permanently rooted your phone.

Check via rootchecker. If you have done everything properly then you will see that your phone is now rooted.

Congrats.
 

Similar threads


Latest posts

Top Bottom