Hirap ka bang makasagap ng magandang signal? Gusto mo bang makanood ng mga bagong palabas for FREE? No worries dahil sa wakas, oras na para mag-paalam sa ating mga lumang antenna at hindi magandang reception. Gone are the days when we would have to place long wires and cables all over the room to be able to get a good reception to watch our favorite shows!
Here are the EASY STEPS na kailangan mong sundin para i-set up ang iyong digital TV. Tara! Start your viewing experience with Pop Life TV!
Step 1: I- connect ang TV sa digital TV box gamit ang HDMI cable, o colored AV cable.
Gumamit ng HDMI cable o colored AV cable to connect your TV sa digital TV box. The digital TV box lets you access all the programs and channels in clear, and sometimes HD digital quality!
Step 2: I- connect ang antenna sa Digital TV Box.
Ang susunod na step ay I-konek ang antenna sa digital box. Ang digital TV antenna ay ang nag-sa-scan ng airwaves para sa digital channels na iyong mapapanooran. This is not like the old antennas that are big, long, and very hard to setup!
Step 3: I- lagay ang antenna sa mataas na lugar.
Pagkatapos ikabit ang antenna sa digital box, ang next step ay ilagay ito sa mataas na lugar. You just have to make sure that the area is higher than the TV, and free from other electronic devices.
Step 4: Ngayon, pwede na tayong mag scan!
Malapit na! dalawang steps nalang at pwedeng pwede ka nang mag-enjoy at manood sa Pop Life TV! Gamit ang ATV remote control, puntahan ang menu ng Digital TV Box. Hanapin ang 'SCAN' option, para mag scan ng channels. Pag natapos na ang scanning, pindutin ang 'OK' or 'EXIT', para makumpleto ang set-up.
Step 5: Oras na para manood sa Pop Life TV!
After scanning, bisitahin ang mga channels using the up and down buttons on the remote control until you find Pop Life TV. Mae-enjoy mo na ang mga FRESH international programs that you have not seen before! Simulan na mag-binge-watch sa Pop Life TV!
The time for Digital TV is here! We no longer have to crawl on top of the roof of our houses to place a big and awkward antenna just to get that perfect signal. Gone are the days when we would have to place long wires and cables all over the room to be able to get a good reception to watch our favorite shows. Remember the times when you used nails to hold down your antenna wires? That time is over! Welcome to the world of digital TV! Digital TV lets you access hundreds of programs simply and easily. All you need are a few simple things and you can get started!
Here are the easy steps you would need to setup your digital TV and start your viewing experience with Pop Life TV! Let’s get started!
Step 1: Connect your TV to the Digital TV Box
You can use the HDMI cable or the colored AV cable to connect your TV to the Digital TV Box. The key to digital TV is in this box! The digital TV box lets you access all the programs and channels in clear, and sometimes HD digital quality!
Step 2: Connect the antenna to the Digital TV Box
To complete your experience, connect the antenna to the digital box. The digital TV antenna scans the airwaves for all the digital channels that are available for your viewing pleasure! But don’t be afraid! This is not like the old antennas that are big, long, and very hard to setup! Digital antennas are small devices that can fit in your hand and you just need to simply place them in an elevated position (not the roof!) to get the right signal! Easy!
Step 3: Place the antenna in an elevated position
After connecting the antenna to the digital box, the next step is to place it in an elevated position. Make sure the area is higher than the TV, and free from the reach of other electronic devices. Don’t worry! There is no need to go to the roof! Digital antennas are small devices that can fit in your hand and you just need to simply place them in an elevated position (not the roof!) to get the right signal! Easy!
Step 4: Now it’s time to scan!
Almost there! You are now four steps closer to enjoying the Pop Life! Just use the ATV remote control to access the menu of your Digital TV Box. Find the ‘SCAN’ option to let your device scan for the channels. When the scanning is done (sometimes the screen will show a bar that goes 100%), press EXIT or OK to complete the setup!
Step 5: Time to watch Pop Life TV!
The final step! After scanning, go through the channels using the up and down buttons on the remote control until you find Pop Life TV. You can now enjoy new and fresh international programs that you have not seen before! Time for some binge-watching on Pop Life TV!
Here are the EASY STEPS na kailangan mong sundin para i-set up ang iyong digital TV. Tara! Start your viewing experience with Pop Life TV!
Step 1: I- connect ang TV sa digital TV box gamit ang HDMI cable, o colored AV cable.
Gumamit ng HDMI cable o colored AV cable to connect your TV sa digital TV box. The digital TV box lets you access all the programs and channels in clear, and sometimes HD digital quality!
Step 2: I- connect ang antenna sa Digital TV Box.
Ang susunod na step ay I-konek ang antenna sa digital box. Ang digital TV antenna ay ang nag-sa-scan ng airwaves para sa digital channels na iyong mapapanooran. This is not like the old antennas that are big, long, and very hard to setup!
Step 3: I- lagay ang antenna sa mataas na lugar.
Pagkatapos ikabit ang antenna sa digital box, ang next step ay ilagay ito sa mataas na lugar. You just have to make sure that the area is higher than the TV, and free from other electronic devices.
Step 4: Ngayon, pwede na tayong mag scan!
Malapit na! dalawang steps nalang at pwedeng pwede ka nang mag-enjoy at manood sa Pop Life TV! Gamit ang ATV remote control, puntahan ang menu ng Digital TV Box. Hanapin ang 'SCAN' option, para mag scan ng channels. Pag natapos na ang scanning, pindutin ang 'OK' or 'EXIT', para makumpleto ang set-up.
Step 5: Oras na para manood sa Pop Life TV!
After scanning, bisitahin ang mga channels using the up and down buttons on the remote control until you find Pop Life TV. Mae-enjoy mo na ang mga FRESH international programs that you have not seen before! Simulan na mag-binge-watch sa Pop Life TV!
The time for Digital TV is here! We no longer have to crawl on top of the roof of our houses to place a big and awkward antenna just to get that perfect signal. Gone are the days when we would have to place long wires and cables all over the room to be able to get a good reception to watch our favorite shows. Remember the times when you used nails to hold down your antenna wires? That time is over! Welcome to the world of digital TV! Digital TV lets you access hundreds of programs simply and easily. All you need are a few simple things and you can get started!
Here are the easy steps you would need to setup your digital TV and start your viewing experience with Pop Life TV! Let’s get started!
Step 1: Connect your TV to the Digital TV Box
You can use the HDMI cable or the colored AV cable to connect your TV to the Digital TV Box. The key to digital TV is in this box! The digital TV box lets you access all the programs and channels in clear, and sometimes HD digital quality!
Step 2: Connect the antenna to the Digital TV Box
To complete your experience, connect the antenna to the digital box. The digital TV antenna scans the airwaves for all the digital channels that are available for your viewing pleasure! But don’t be afraid! This is not like the old antennas that are big, long, and very hard to setup! Digital antennas are small devices that can fit in your hand and you just need to simply place them in an elevated position (not the roof!) to get the right signal! Easy!
Step 3: Place the antenna in an elevated position
After connecting the antenna to the digital box, the next step is to place it in an elevated position. Make sure the area is higher than the TV, and free from the reach of other electronic devices. Don’t worry! There is no need to go to the roof! Digital antennas are small devices that can fit in your hand and you just need to simply place them in an elevated position (not the roof!) to get the right signal! Easy!
Step 4: Now it’s time to scan!
Almost there! You are now four steps closer to enjoying the Pop Life! Just use the ATV remote control to access the menu of your Digital TV Box. Find the ‘SCAN’ option to let your device scan for the channels. When the scanning is done (sometimes the screen will show a bar that goes 100%), press EXIT or OK to complete the setup!
Step 5: Time to watch Pop Life TV!
The final step! After scanning, go through the channels using the up and down buttons on the remote control until you find Pop Life TV. You can now enjoy new and fresh international programs that you have not seen before! Time for some binge-watching on Pop Life TV!
