This is the solution if your gigabyte dual BIOS Computer shows Gigabyte UEFI Dual Boot blue screen and then reboots constantly.
1. Shutdown the system and unplug the power cable.
2. Locate Pin one ( number 1 printed next to the pin) and Pin 6 (count counter clockwise from pin 1 to get pin 6 location) on the M-BIOS
3. Either solder two pieces of wire to both pin and connect them or hold each prong of a pair of tweezers on each pin .
4. Power up the system while the pins are shorted .
5 . Let go or disconnect the wires once you hear the beep.
And that's it! Your backup bios will flash the main bios.
Disclaimer : Other models may have different BIOS chip in which case the shorting of the same pins will result in motherboard damage. Try it at your own risk.
1. Shutdown the system and unplug the power cable.
2. Locate Pin one ( number 1 printed next to the pin) and Pin 6 (count counter clockwise from pin 1 to get pin 6 location) on the M-BIOS
3. Either solder two pieces of wire to both pin and connect them or hold each prong of a pair of tweezers on each pin .
4. Power up the system while the pins are shorted .
5 . Let go or disconnect the wires once you hear the beep.
And that's it! Your backup bios will flash the main bios.
Disclaimer : Other models may have different BIOS chip in which case the shorting of the same pins will result in motherboard damage. Try it at your own risk.
